ONLINE ELECTRONICS LTD
2405_5001_A01
Page 8 of 14
3.3.
TURNING ON
There is a hole on top of the frame that allows access
to the control button of the 2405 module, to turn the
unit on simply press and hold the control button until
the COMPANY LOGO appears on the screen. This
should take approximately 5 seconds.
The next screen shows the PRODUCT LOGO and
firmware version at the bottom of the screen in vXX
format. This screen will be displayed for 5 seconds as
shown by the COUNTDOWN INDICATOR at the bottom
left corner of the display.
When the COUNTDOWN INDICATOR reaches zero or
the control button is pressed the next screen will
appear.
The next screen shows the TIME & DATE, see section
3.5.3 SET TIME / DATE for more information.
The unit now completes an INTERNAL CHECK of
functionality. On successful completion the unit will go
to the OPERATING SCREEN. If the check fails then an
error message will be displayed before the unit goes to
the OPERATING SCREEN.
