Online Electronics 4003 MAGSIG, Руководство по эксплуатации

Страница: 14 / 36

4003_5001_D02 Page 13 of 35
4.5.1. VIEW EVENTS
Selecting this item will allow the user to cycle through all logged EVENTS from newest to oldest.
The peak DIFFERENCE flux reading, EVENT number, and EVENT date and time are shown. Firmly
pressing the CONTROL BUTTON momentarily will cycle to the next event. If the control button
is not pressed for 30 seconds, or if the user cycles beyond the last recorded event the unit will
return to LISTENING mode.
4.5.2. COPY EVENTS TO SD CARD
Selecting this item will copy ALL events (including erased events)
to the SD card
if present. If the SD card is not present, an “SD
CARD NOT INSTALLED” error will be displayed. If the EVENT
memory has not been previously written an “EVENT XXX SKIPPED”
will be displayed. For each event successfully written to SD card
as “EVENT XXX SUCCESSFUL” will be shown. If the event already
exists on the SD card; with same detection time/date, it will be
overwritten. The process can be stopped by firmly pressing the
CONTROL BUTTON.
Each event written will be in Comma Separated Values (.csv)
format which can be read by most spreadsheet applications. The
filename format of “YYMMDD HHMMSS EVENT XXX LOG.csv”,
where YYMMDD is the date, HHMMSS is the time and XXX is the
event number.
Each log file will consist of
Event No: XXX
Threshold Time: DD/MM/YY HH:MM:SS
Detection Time: DD/MM/YY HH:MM:SS
Peak Difference: 3699mG
Peak Raw 4216mG
Filter: 0517mG
Log interval 0.1 Seconds
Detection index 125
Status: 0
Event Data
XXXX, XXXX … … XXXX
End of Event Data
The log interval is the time span between each data value.
Detection index is the index of the data value where the detection criteria was met.
4.5.3. DELETE ALL EVENTS
Selecting this item will delete all logged EVENT data. A screen will be displayed saying “PRESS
TO ERASE ALL EVENTS”. To eras
e all events, firmly press the CONTROL BUTTON before the
COUNTDOWN INDICATOR reaches 0. To cancel the erase simply allow the COUNTDOWN
INDICATOR to reach 0 without pressing the CONTROL BUTTON.
4.5.4. SHUTDOWN
Selecting this item switches off the unit. The unit will remember all settings (such as the DELAYS
and THRESHOLD) until next time the unit is switched on.