Onkyo UWL-1 Скачать руководство пользователя страница 6 | Manualshive

Страница: 6 / 20

Onkyo UWL-1 Скачать руководство пользователя страница 6

6

Features

■

Wirelessly stream audio from your PC all around your house

With the Onkyo UWL-1 Wireless USB Audio Transport, you can play the digital music
(MP3, WMA, WAV, etc) stored on your PC through an audio system or powered speakers
located in any room in your house. You can also stream Internet radio, CDs, and DVDs.

■

UTX-1 USB Transmitter and RX-1 Receiver

The UWL-1 consists of the UTX-1 USB Transmitter, which plugs into a USB port on your
PC and wirelessly transmits audio, and the RX-1 Receiver, which receives the audio and
connects to your audio system or powered speakers.

■

Quick and easy setup

Since the Transmitter uses standard Windows

®

USB audio drivers, there’s no need to install

any drivers and configure any settings, so setup is both quick and easy. Simply plug the
Transmitter into a free USB port on your PC, and that’s it!

■

30 meter range

The UWL-1 has a 30 meter range, so you can transmit audio all around your house. Note
that the usable range may be reduced by walls and floors constructed from concrete or steel.

■

High-quality audio

The UWL-1 transmits audio digitally over the 2.4 GHz band and uses no data compression,
providing high-quality audio equivalent to CD quality.

■

Optical digital output

The RX-1 Receiver can be connected to an audio system via its optical digital output for the
best audio quality.

■

Analog output

The RX-1 Receiver can be connected to virtually any audio component via its minijack
audio output.

«
...
4
5
6
7
8
...
»

Содержание UWL-1





















Отзывы:

Нет отзывов