6
Positioning the XM Passport System
You can check the signal strength of the XM radio signal
and adjust the position of the XM Passport System
accordingly.
XM Radio Messages
The following messages may appear while using XM
radio.
❑
CHECK ANTENNA
The XM Passport System is not connected properly.
Check the connection.
❑
UPDATING
The XM user encryption code is being updated. Please
wait.
❑
NO SIGNAL
The signal is too weak. Check the XM Passport System
connection and reposition it for the best reception.
❑
LOADING
The AV receiver is tuning or decoding audio or text data.
Please wait.
❑
OFF AIR
The XM channel you selected is not currently broadcast-
ing. Select another channel.
1
On the AV receiver, press the
[SETUP] button.
2
Use the TUNING Up and Down
[
]/[
] buttons to select “7. ANT
Aiming,” and then press
[ENTER].
3
Adjust the position of the XM
Passport System so that the SAT
signal strength bar is as long as
possible.
If you can’t receive a satellite signal,
press the Down [
] button to display
the terrestrial (TER) signal strength
meter and adjust your XM Passport
System so that the bar is as long as pos-
sible.
Terrestrial
signals are only available in
certain areas.
So long as the signal strength is good,
you can enjoy XM Radio by using
either satellite or terrestrial reception.
MASTER VOLUME
VIDEO
STANDBY
TONE
DISPLAY
STEREO
DIMMER
MEMORY
DIGITAL
INPUT
TUNING
MODE
A
B
SPEAKERS
TUNER
TAPE
VIDEO
3
VIDEO
2
VIDEO
1
VCR
DVD
MULTI CH
C D
SETUP
RETURN
CLEAR
LISTENING MODE
AUDIO
L
R
VIDEO
3
INPUT
STANDBY/ON
PHONES
TUNING
PRESET
ENTER
SETUP
TUNING
ENTER
SETUP
TUNING
PRESET
XM̲574̲En Page 6 Tuesday, June 20, 2006 9:07 AM
