Onkyo TX-SR703, Руководство по обслуживанию

Страница: 103 / 133

TX-SR703/E
FW UPGRADE
How to check version
DISPLAY
+
STANDBY/ON
Ver.1.08/05Y29a
FL tube
Within 3 sec.
DSP Ver.:
SETUP
DSP F/W Update
ENTER
Within 3 sec.
FL tube
FL tube
Selector key
DSP Ver.:05Y28a
FL tube
SETUP
HDM Ver.:
TUN Ver.:05807A
SETUP
1. Hold down "Display" and then press "Standby" button to show Main version.
2. Press "Setup" within 3 seconds.
When you press "Setup", another version of program is shown.
Front Display shows each version of programs in the following order:
DSP Ver.
HDM Ver. (HDMI) -- blank
Tun Ver. (XM Radio) -- blank except MDD/MDC
3. DSP Ver. is not shown easily.
To check the version of DSP FW,
3-1 When "DSP Ver. " is shown, press "Enter" within 3 seconds.
"DSP F/W Update" will be shown.
3-2 Press any input selector button to exit "DSP F/W Update".
3-3 Hold down "Display" and then press "Standby" button to show Main version.
3-4 Press "Setup" within 3 seconds.
Main FW and DSP FW
1) If both FWs need to be upgraded, DSP FW Upgrade should
be done first.
2) If either of Main Board or DSP Board is replaced, certain
combinations of Main-DSP FW versions do not allow you to
upgrade DSP FW.
In that case, rewrite a compatible version of Main FW,
upgrade DSP FW, and then upgrade Main FW.
DSP: Ver.05723a - Main: Ver. 1.04/05921a,1.06/05X06b,
DSP: Ver. 05Y28a - Main: Ver. 1.08/05Y25a
Within 3 sec.
Within 3 sec.
FL tube