3:
16
Basic Setup
Automatically setting up for surround sound
(AccuEQ Room Calibration)
Place the supplied setup microphone in the listening position,
measure the test tones emitted by the speakers, then the unit
automatically sets the optimum volume level for each
speaker, the crossover frequencies, and the distance from
the listening position. This also enables correction of
distortion caused by the acoustic environment of the room.
CAUTION
•
The test tones used in the AccuEQ Room Cal. setup are
output at high volume.
Important
•
The OSD will not appear if you have connected using the
composite output to your TV. Use HDMI connections for
AccuEQ Room Cal. setup.
•
The AccuEQ Room Cal. setup will overwrite any existing
speaker settings you’ve made.
•
Before using the AccuEQ Room Cal. setup, the
USB
input
should not be selected as an input source.
1
Switch on the receiver and your TV.
2
Switch the TV input to the input that connects this
receiver to the TV through the corresponding HDMI
cable.
3
Connect the microphone to the SETUP MIC jack on the
front panel.
Make sure there are no obstacles between the speakers
and the microphone.
If you have a tripod, use it to place the microphone so
that it’s about ear level at your normal listening position.
Otherwise, place the microphone at ear level using a
table or a chair.
4
Press
BD/DVD
button on the remote control to switch
to BD/DVD entry.
5
Press
button.
The Setup appears on your TV. Use
/
/
/
and
ENTER
on the remote control to navigate through the
screens and select menu items. Press
to exit the
current menu.
•
Press
at any time to exit the Setup. If you cancel
the AccuEQ Room Cal. setup at any time, the receiver
automatically exits and no settings will be made.
•
The screensaver automatically starts after three
minutes of inactivity.
6
Select “AccuEQ Room Cal.” from the Setup, then press
ENTER
.
7
Press
ENTER
again.
•
MIC IN
blinks when the microphone is not connected
to
SETUP MIC
jack.
Try to be as quiet as possible after pressing
ENTER
.
The system outputs a series of test tones to establish the
ambient noise level.
8
Follow the instructions on-screen.
•
Make sure the microphone is connected.
•
Make sure the subwoofer is on and the volume is
turned up.
•
See below for notes regarding background noise and
other possible interference.
RECEIVER
RECEIVER
AUDIO SEL
AUDIO SEL
LATE NIGHT
CBL/SAT
CBL/SAT STRM BOX
STRM BOX
BD/DVD
BD/DVD
SURR
SURR
TREBLE
DSP
DSP
QUICK MENU
QUICK MENU
TUNER
USB
HOME
ENTER
RETURN
TUNING
PRESET
AV RECEIVER
TX- SR373
MASTER VOLUME
USB
SETUP MIC
5V / 0.5A
S e t u p
1 . A c c u E Q R o o m C a l .
2.Manual SP Setup
3.Input Assign
4.Auto Power Down
5.HDMI Setup
R e t u r n
