Step 2:
Setting Up
En-9
Operation
: Use the remote controller of this unit to
operate the menus shown on the TV screen. To display the
guidance, you need to make HDMI connection between
the unit and TV. Select the item with the cursor buttons of
the remote controller and press ENTER to confirm your
selection. To return to the previous screen, press RETURN.
1
Turning the Power On
Connect the power cord to the outlet (
). Press
z
ON/
STANDBY on the main unit or
z
RECEIVER on the remote
controller to turn the unit on or to standby mode.
●
When the unit is turned on, a large instantaneous
current may flow affecting functionality of the computer
and other devices. It is recommended to use a separate
outlet from that for the computer or such other sensitive
devices.
¼
Taiwanese models include removable power cords. Connect the power cord
to AC INLET of the unit and then connect to the outlet. Always disconnect
the outlet side first when disconnecting the power cord.
2
Making Speaker Setting
The speaker configuration of this unit is set to 5.1 ch by
default. Refer to the following sections to change settings
so that you can use the unit in a different environments
such as a configuration without center speaker, surround
speaker or subwoofer.
●
If the settings do not match the actual speaker
configuration, audio playback may not be performed
correctly. Check your speaker configuration and make
correct settings.
●
These settings cannot be changed if headphones are
connected or audio is output from the speakers of the
TV.
Changing speaker configuration
1� After pressing
RECEIVER, press SETUP on the
remote controller�
2� Select "2� Speaker" with the cursor, and press
ENTER�
3� Select "Configuration" with the cursor, and press
ENTER�
Select how many speakers you have.
2-1. Configuration
Speaker Channels
Subwoofer
5.1ch
Yes
Use the cursors
d
/
c
to configure the number of connected
speaker channels and the existence of a subwoofer.
When setting is complete, press SETUP to close the menu
screen.
●
You can change the size, crossover frequency, and
Double Bass settings for each speaker in "Crossover".
TX-SR343_BAS_En_SN29401958_1502xx.indd 9
2015/04/12 15:36:31
