FIRMWARE UPDATE -1
TX-SR876/SA876
TX-SR876/SA876
How to Check Versions of Main, DSP(1st to 3rd), HDMI and Video FW
1. Press and hold down [
DISPLAY
] button, then press [
ON/STANDBY
] button when the unit is powered on.
The main microprocessor version will be displayed on FL display for about 3 seconds.
2. Press [
Tone +
] button while the version is displayed. Then, “
DSP 1st SR9061:08611A
” will be displayed.
Press [
Tone +
] button again while “
DSP 1st SR9061:08611A
” is displayed. Then, “
DSP 2nd SR9062:08605C
” will be
displayed. In this way, as [
Tone +
] button is pressed while a version is displayed, the next information will be displayed.
If [
Tone -
] button is pressed, the order will be reversed.
D S P 2 n d :
S R 9 0 6 2 : 0 8 6 0 5 C
D S P 1 s t :
S R 9 0 6 1 : 0 8 6 1 1 A
M a i n :
8 7 1 . 0 1 / 0 8 8 0 1 A
M a i n :
8 7 1 . 0 1 / 0 8 8 0 1 A
<e.g.>
V i d e o :
0 8 7 0 3 E O
H D M I :
1 . 0 1 / 0 8 6 2 7 A
X M :
1 . 0 0 / 0 8 5 0 5 A
S I R I U S :
1 . 0 0 / 0 8 5 2 2 A
D S P 3 r d :
S R 9 0 6 3 : 0 8 5 0 6 A
[Tone +]
[Tone -]
Note:
These versions are the latest as of August 20, 2008.
Note:
In case of failure, Video FW cannot be reloaded.
Board replacement will be necessary for newer
video FW version.
Note:
XM and SIRIUS are only for North American models.