Onkyo TX-NR838, Основное руководство

Страница: 18 / 24

Troubleshooting
18
Rear Panel
1
RI REMOTE CONTROL jack : An Onkyo product with RI
jack can be connected and synchronized with this unit.
2
FM ANTENNA jack (75 Ω) and AM ANTENNA
terminal : The supplied antennas are connected.
3
COMPONENT VIDEO IN and OUT jacks : Component
video input/output jacks
4
ETHERNET port : Used for LAN connection
5
RS232 port : Connected to the home control system. (
¼
)
6
IR jack
: Connected to the multiroom remote control kit.
( ¼ )
7
12V TRIGGER OUT jack : Allows you to connect a
device with trigger input jack in a separate room to
enable power link operation between the device and the
unit. (
¼
)
¼ ¼ Special devices or cable connections are necessary to use the
control functions
5
to
7
. Contact the specialized stores for more
information.
8
HDMI IN/OUT jacks : Digital video signals and audio
signals are transmitted between the unit and the
connected devices.
9
Wireless antenna : Used for Wi-Fi connection or when
using a Bluetooth-enabled device. Adjust their angles
according to the connection status.
90°
180°
90°
180°
F
AC INLET : The power cord is connected.
G
DIGITAL IN COAXIAL/OPTICAL jacks
: Digital audio
signals are input.
H
GND terminal : The ground wire of the turntable is
connected.
I
Composite video and analog audio jacks : Analog
video signals and audio signals are input.
J
MONITOR OUT V jack
: Video signals are output to the
connected monitor or TV.
K
PRE OUT jacks : A power amplifier or subwoofer with
built-in amplifier is connected.
L
PRE/LINE OUT ZONE2/ZONE3 jacks : Audio output
jacks connected to the pre-main amplifier for multi-zone
playback in a separate room.
M
SPEAKERS terminals : Speakers are connected. To
use the Multi-zone function, connect the speakers in the
separate room to the ZONE2 speaker terminals.
1 4 5 6 7
G
2 3 8 9 F
I J H L M K