Advanced Settings
27
Speaker Configuration
Allows you to change the speaker configuration such as presence or not of each speaker,
crossover frequency, and so on. Settings are automatically configured if you use the
Automatic Speaker Setup. Audio will not be output while you are making this setting.
Setting item
Default Value
Setting Details
Subwoofer
Yes
Set whether a subwoofer is connected or not.
"Yes": When subwoofer is connected
"No": When subwoofer is not connected
Front
80Hz (THX)
Select the frequency to start outputting
frequencies (crossover frequency) for each
channel from "40Hz" to "200Hz".
"Full Band": Full band will be output.
r
"Front" will be fixed to "Full Band" if
"Subwoofer" is set to "No", and the bass
frequencies of the other channels will be output
from the front speakers. To make the settings,
refer to the instruction manual of the speakers
used.
Center
80Hz (THX)
Select the frequency to start outputting
frequencies (crossover frequency) for each
channel from "40Hz" to "200Hz".
"Full Band": Full band will be output.
"None": When no compatible speaker is
connected
r
"Full Band" can only be set if "Front" is set to
"Full Band".
Surround
80Hz (THX)
Select the frequency to start outputting
frequencies (crossover frequency) for each
channel from "40Hz" to "200Hz".
"Full Band": Full band will be output.
"None": When no compatible speaker is
connected
r
"Full Band" can only be set if "Front" is set to
"Full Band".
Setting item
Default Value
Setting Details
Back
80Hz (THX)
Select the frequency to start outputting
frequencies (crossover frequency) for each
channel from "40Hz" to "200Hz".
"Full Band": Full band will be output.
"None": When no compatible speaker is
connected
r
In any of the following cases, this setting will be
set to "None".
– "Surround" is set to "None".
– "Speaker Settings" - "Front Speakers Type"
is set to "Bi-Amp".
– "Speaker Settings" - "Height Speakers
Type" is set to other than "Not Use".
– "Speaker Settings" - "Powered Zone 2" is
set to "Yes" and also Zone2 is set to on.
r
"Full Band" can only be set if "Surround" is set
to "Full Band".
Back ch
2ch
Select the number of channels of the connected
surround back speaker.
"1ch": When one speaker is connected (Connect
to the BACK L terminal)
"2ch": When two speakers are connected
r
The setting cannot be changed if "Back" is set
to "None".
Height
None
Select the frequency to start outputting
frequencies (crossover frequency) for each
channel from "40Hz" to "200Hz".
"Full Band": Full band will be output.
r
In any of the following cases, this setting will be
set to "None".
– "Speaker Settings" - "Height Speakers
Type" is set to "Not Use".
– "Speaker Settings" - "Front Speakers Type"
is set to "Bi-Amp".
– "Speaker Settings" - "Powered Zone 2" is
set to "Yes" and also Zone2 is set to on.
r
If any type is selected in "Speaker Settings" -
"Height Speakers Type", this setting will be set
to "80Hz(THX)" as default value. In this case,
this setting cannot be set to "None".
r
"Full Band" can only be set if "Front" is set to
"Full Band".