53
En
Note
• If you want to use Audyssey Dynamic EQ
®
or
Audyssey Dynamic Volume
®
with THX listening modes, set
the “
Loudness Plus
” setting to “
Off
” and set “
Preserve THX
Settings
” to “
No
” (
➔
page 49
).
• If you make Dynamic Volume active, “
Dynamic EQ
” is set to
“
On
”. The
Dynamic Vol
indicator will light.
• When “
Dynamic EQ
” is set to “
Off
”, “
Dynamic Volume
” is
automatically switched to “
Off
”.
• These technologies cannot be used when:
– a pair of headphones is connected, or
– either Pure Audio or Direct listening mode is selected.
IntelliVolume
■
IntelliVolume
`
–12dB
to
0dB
to
+12dB
in 1 dB steps.
With IntelliVolume, you can set the input level for each
input selector individually. This is useful if one of your
source components is louder or quieter than the others.
Use
e
/
r
to set the level.
If a component is noticeably louder than the others, use
e
to reduce its input level. If it’s noticeably quieter, use
r
to
increase its input level.
A/V Sync
■
A/V Sync
`
0msec
to
800msec
in 5 msec steps.
When using progressive scanning on your Blu-ray
Disc/DVD player, you may find that the picture and sound
are out of sync. With this setting, you can correct this by
delaying the audio signals.
To view the TV picture while setting the delay, press
ENTER
.
To return to the previous screen, press
RETURN
.
The range of values you can adjust will depend on
whether your TV or display supports HDMI Lip Sync and
if the “
Lip Sync
” setting is set to “
On
” or not
(
➔
page 59
).
Note
• A/V Sync is disabled when the Pure Audio listening mode is
selected, or when the Direct listening mode is used with an
analog input source.
• This setting cannot be used with the
NET
input selector.
Name Edit
You can enter a custom name for each individual input
selector and radio preset for easy identification. When
entered, the custom name will appear on the display.
The custom name is edited using the character input
screen.
■
Name
About Audyssey Dynamic EQ
®
Audyssey Dynamic EQ solves the problem of
deteriorating sound quality as volume is decreased by
taking into account human perception and room
acoustics. Dynamic EQ selects the correct frequency
response and surround levels moment-by-moment at
any user-selected volume setting. The result is bass
response, tonal balance, and surround impression that
remain constant despite changes in volume. Dynamic
EQ combines information from incoming source levels
with actual output sound levels in the room, a
prerequisite for delivering a loudness correction
solution. Audyssey Dynamic EQ works well by itself.
However, if Audyssey MultEQ
®
XT is on, the two
technologies work in tandem to provide well-balanced
sound for every listener at any volume level.
About Audyssey Dynamic Volume
®
Audyssey Dynamic Volume solves the problem of large
variations in volume level between television programs,
commercials, and between the soft and loud passages of
movies. Dynamic Volume looks at the preferred volume
setting by the user and then monitors how the volume of
program material is being perceived by listeners in real
time to decide whether an adjustment is needed.
Whenever necessary, Dynamic Volume makes the
necessary rapid or gradual adjustments to maintain the
desired playback volume level while optimizing the
dynamic range. Audyssey Dynamic Volume works fine
by itself, but can also be used with
Audyssey Dynamic EQ. When both are on,
Audyssey Dynamic EQ adjusts the perceived bass
response, tonal balance, surround impression, and
dialog clarity whether watching movies, flipping
between television channels, or changing from stereo to
surround sound content, when Dynamic Volume adjusts
the volume.
1
Use
q
/
w
/
e
/
r
to select a character, and then
press
ENTER
.
Repeat this step to enter up to 10 characters.
2
To store a name when you’re done, be sure to
select “OK” by using
q
/
w
/
e
/
r
, and then press
ENTER
.
