9
Front & Rear Panels
—Continued
The page numbers in parentheses show where you can find the main explanation for each item.
a
ON/STANDBY button (40)
This button is used to set the AV receiver/AV ampli-
fier to On or Standby.
b
STANDBY indicator (40)
This indicator lights up when the AV receiver/AV
amplifier is in Standby mode, and it flashes while a
signal is being received from the remote controller.
c
ZONE 2 indicator (99)
This indicator lights up when Zone 2 is selected.
d
Input selector buttons (54)
These buttons are used to select from the following
input sources: MULTI CH, DVD, VCR/DVR,
CBL/SAT, GAME/TV, AUX, TAPE, TUNER, CD,
PHONO.
The [MULTI CH] button selects the DVD analog
multichannel input.
e
Remote control sensor (14)
This sensor receives control signals from the remote
controller.
f
Display
See “Display” on page 10.
g
SETUP button
This button is used to access the onscreen setup
menus that appear on the connected TV.
h
Arrow, TUNING, PRESET and ENTER
buttons
When the AM or FM input source is selected, the
TUNING [
q
]/[
w
] buttons are used to tune the tuner,
and the PRESET [
e
]/[
r
] buttons are used to select
radio presets (see page 58) (TX-SR706 only).
When the onscreen setup menus are used, they work
as arrow buttons and are used to select and set
items. The [ENTER] button is also used with the
onscreen setup menus.
i
RETURN button
This button is used to return to the previously dis-
played onscreen setup menu.
j
MASTER VOLUME control (54) and indicator
This control is used to adjust the volume of the AV
receiver/AV amplifier to –
∞
dB, –81.5 dB through
+18.0 dB (relative display).
The volume level can also be displayed as an abso-
lute value. See “Volume Setup” on page 89.
k
PURE AUDIO button and indicator (62)
Selects the Pure Audio listening mode. The indica-
tor lights up when this mode is selected. Pressing
this button again selects the previous listening
mode.
l
PHONES jack (56)
This 1/4-inch phone jack is for connecting a stan-
dard pair of stereo headphones for private listening.
m
ZONE 2 and OFF buttons (99)
The [ZONE 2] button is used to select the input
source for Zone 2.
The [OFF] button is used to turn off the output of
Zone 2.
n
ZONE 2 LEVEL button (100)
Used when adjusting the volume level of Zone 2.
o
TONE, [–] & [+] buttons (55)
Used to adjust the tone (bass and treble).
p
MOVIE/TV button (62)
Selects the listening modes intended for use with
movies and TV.
q
MUSIC button (62)
Selects the listening modes intended for use with
music.
r
GAME button (62)
Selects the listening modes intended for use with
video games.
s
DISPLAY button (55)
This button is used to display various information
about the currently selected input source.
t
DIGITAL INPUT button (96)
Selects the options for automatic audio input selec-
tion setup.
u
DIMMER or RT/PTY/TP button (55, 60)
This button is used to adjust the display brightness.
On the European model, this is the [RT/PTY/TP]
button, and it’s for RDS (Radio Data System). See
“Using RDS (not North American model)” on
page 59.
v
MEMORY or Re-EQ button (58, 83)
This button is used when storing or deleting radio
presets.
On the TX-SA706, this button is used to turn the
Re-EQ function on or off.
w
TUNING MODE or LATE NIGHT button (57, 83)
This button is used to select the Auto or Manual
tuning mode.
On the TX-SA706, this button is used to turn the
Late Night function on or off.
x
SETUP MIC jack (49)
The included speaker setup microphone is con-
nected here for automatic speaker setup.
y
AUX INPUT
This input can be used to connect a camcorder,
game console, and so on. There are jacks for
S-Video, composite video, analog audio, and optical
digital audio.
