10
A
Recording
1
Procedure for recording
Confirm that the amplifier is set up
correctly for recording. (Refer to the
amplifier’s instruction manual for details.)
1. Insert the cassettes.
Make sure the side to be recorded is
facing outward.
•
Recording is not possible on the tape
leaders (the transparent sections you
see at both ends of the tape.)
2. Set the Dolby NR by pressing the
DOLBY NR button repeatedly until
the desired Dolby NR indicator (B or
C) turns on or off.
3. Press the REVERSE MODE button,
if you wish to select the auto reverse
mode.
“ b
"
turns off: Only one side of the
tape is recorded.
“ b
"
turns on: Both sides of the tape
are recorded.
If recording starts in the reverse
direction, only side B is recorded.
4. Begin playing the source.
5. Press the REC PAUSE button.
Note:
This deck will not begin recording if you
press the REC PAUSE and
s
or
a
button at the same time. To begin record-
ing, first press the REC PAUSE button to
put the deck into the rec/pause mode, then
press either the
s
or
a
button as
appropriate.
2
3
4
5
• Check to see if one or both of the cassette’s erasure prevention tabs have been removed.
• Confirm that the cassette deck is properly connected to the amplifier.
e
1
2
3
5
6
EJECT
REVERSE
MODE
DOLBY NR
B
C
REC
PAUSE
AUTO
SPACE
FM/AM
CD/LINE
TAPE/MD
CR-185X
CHR-185X
or
INPUT
