TEST DSP Output channel
DSP
DSP
Config.
Master
Speaker etc.
No.
Output
Output
Vol.
Relay
Frequency
Voltage
4-00
ALL
1kHz (SW:30Hz)
-20dBFS
Y/L/L/L/L
64(Ref)
F/CS/SB
*6
4-01
ALL
30Hz (SW
:
1kHz)
-20dBFS
Y/L/L/L/L
64(Ref)
F/CS/SB
*6
4-02
ALL
20kHz
-20dBFS
Y/L/L/L/L
64(Ref)
F/CS/SB
*6
DSP Freq.Response
4-03
SW
30Hz
-20dBFS
N/L/L/L/L
58(76)
F/CS/SB
*6
Characteristic(1)
4-04
FL,FR
30Hz
-20dBFS
N/L/L/L/L
64(Ref)
F/CS/SB
*6
Characteristic(2)
4-05
1kHz (SW
:
30Hz)
-20dBFS
Y/L/L/L/L
64(Ref)
F/CS/SB
Mute On
*6
Muting
4-06
ALL
1kHz (SW
:
30Hz)
-20dBFS
Y/L/L/L/L
Min(Min)
F/CS/SB
*6
Volume Max.Attenuation
4-07
FR,C,SL,SR,SBL,SBR,SW
10kHz
-20dBFS
Y/L/L/L/L
64(Ref)
F/CS/SB
Mute_FL
*6
Separation(FL)
4-08
FL,C,SL,SR,SBL,SBR,SW
10kHz
-20dBFS
Y/L/L/L/L
64(Ref)
F/CS/SB
Mute FR
*6
Separation(FR)
4-09
FL,FR,SL,SR,SBL,SBR,SW
10kHz
-20dBFS
Y/L/L/L/L
64(Ref)
F/CS/SB
Mute_C
*6
Separation(C)
4-10
FL,FR,C,SR,SBL,SBR,SW
10kHz
-20dBFS
Y/L/L/L/L
64(Ref)
F/CS/SB
Mute_SL
*6
Separation(SL)
4-11
FL,FR,C,SL,SBL,SBR,SW
10kHz
-20dBFS
Y/L/L/L/L
64(Ref)
F/CS/SB
Mute SR
*6
Separation(SR)
4-12
FL,FR,C,SL,SR,SBR,SW
10kHz
-20dBFS
Y/L/L/L/L
64(Ref)
F/CS/SB
Mute_SBL
*6
Separation(SBL)
4-13
FL,FR,C,SL,SR,SBL,SW
10kHz
-20dBFS
Y/L/L/L/L
64(Ref)
F/CS/SB
Mute SBR
*6
Separation(SBR)
4-14
FL,FR,C,SL,SR,SBL,SBR
30Hz
-20dBFS
Y/L/L/L/L
64(Ref)
F/CS/SB
Mute_SW
*6
Separation(SW)
4-15
F C SUR SBR HR Wide SW
10kHz
-20dBFS
Y/L/L/L/L
82 (0dB)
F/C/S/SB/H/W
Mute LH
*6
Separation(FHL)
4-16
F,C,SUR,SBR,HL,Wide,SW
10kHz
-20dBFS
Y/L/L/L/L
82 (0dB)
F/C/S/SB/H/W
Mute_RH
*6
Separation(FHR)
4-17
F C SUR SRB High RW SW
10kHz
-20dBFS
Y/L/L/L/L
82 (0dB)
F/C/S/SB/H/W
Mute LW
*6
Separation(FWL)
4-18
F,C,SUR,SRB,High,LW,SW
10kHz
-20dBFS
Y/L/L/L/L
82 (0dB)
F/C/S/SB/H/W
Mute_RW
*6
Separation(FWR)
4-19
FL
+DC
+Max
Y/L/L/L/L
Max(Max)
F/CS/SB
*1,*3
+DC Protect(FL)
4-20
FR
-DC
-Max
Y/L/L/L/L
Max(Max)
F/CS/SB
*1,*3
-DC Protect(FR)
4-21
C
+DC
+Max
Y/L/L/L/L
Max(Max)
F/CS/SB
*1,*3
+DC Protect(C)
4-22
SL
-DC
-Max
Y/L/L/L/L
Max(Max)
F/CS/SB
*1,*3
-DC Protect(SL)
4-23
SR
+DC
+Max
Y/L/L/L/L
Max(Max)
F/CS/SB
*1,*3
+DC Protect(SR)
4-24
SBL
-DC
-Max
Y/L/L/L/L
Max(Max)
F/CS/SB
*1,*3
-DC Protect(SBL)
4-25
SBR
+DC
+Max
Y/L/L/L/L
Max(Max)
F/CS/SB
*1,*3
+DC Protect(SBR)
4-26
FHL
-DC
-Max
Y/L/L/L/L
Max(Max)
F/C/S/SB/H/W
*1 *3
-DC Protect(FHL)
4-27
FHR
+DC
+Max
Y/L/L/L/L
Max(Max)
F/C/S/SB/H/W
*1,*3
+DC Protect(FHR)
4-28
FWL
-DC
-Max
Y/L/L/L/L
Max(Max)
F/C/S/SB/H/W
*1,*3
-DC Protect(FWL)
4-29
FWR
+DC
+Max
Y/L/L/L/L
Max(Max)
F/C/S/SB/H/W
*1,*3
+DC Protect(FWR)
4-30
ALL
30Hz
-20dBFS
Y/L/L/L/L
64(Ref)
F/C/S/SB/H/W
PASSIVE SW=ON
PASSIVE SW
DSP Gain
DSP Freq.Response
<NOTE>
TEST of NET/USB can't do immediately after the start-up.It should be measure after other TEST.
*1 All SP-RELAYs are turned ON only at the time of this STEP.
Moreover, whether make RELAY restoration time at the time of protection operation into 1 second, and PROTECT input "H" is detected
how many times or it continues 1 second or more, RELAY is not held at OFF or POWER OFF is not carried out, either.
When "H" is 1 seconds or more to PROTECT input and it is set to "L", RELAY is turned ON again.
Moreover, not any MUTE is outputted at the time of this STEP.
*2 Use USB memory which stored only following signals.
In addition, measure using application.
1.44.1kHz_16bit_1kHz_0dBfs_L&R.wav
Reference
2.44.1kHz_16bit_-
∞
dBfs_L&R.wav
SN ratio
3.44.1kHz_16bit_20Hz_0dBfs_L&R.wav
Freq. resp.
4.44.1kHz_16bit_20kHz_0dBfs_L&R.wav
Freq. resp.
5.44.1kHz_16bit_1kHz_0dBfs_Lch.wav
Separation
6.44.1kHz_16bit_1kHz_0dBfs_Rch.wav
Separation
7.48kHz_16bit_1kHz_0dBfs_L&R.wav
Operation check
*3 If voltage-detection protector check in TEST-1-01 starts, DC voltage is output immediately from each channel. (within 100msec.)
2mS
20mS
2mS
MAX
-
MAX
*4 The following signal is output from all channel continuously in TEST1-09.
Auto Measurement Mode
*5 VOLH is detected and H/L of SEC1H is changed.
A detection level is the same as the normal mode. When it is detected, light "FM STEREO" on FL TUBE.
*7 In TEST 1-04 06, some character is displayed while pushing down some button. Another character shall be displayed by each button.
TX-NR636/ 737/ 838/ HT-RC660/ HT-R993/ DTR-30.6/ 40.6/ 50.6
OPERATION CHECK-8
