Onkyo FR-155, Руководство по обслуживанию

Страница: 23 / 48

FR-155
23
REC
STANDBY / ON
STANDBY / ON
EDIT / CLEAR DISPLAY
NO
STANDBY / ON
CD / MD
STANDBY / ON
STANDBY / ON
EDIT / CLEAR
REPEAT
NO
YES
PUSH TO ENTER
MULTI JOG
MD RECORDING ADJUSTMENT PROCEDURES
1.TEST MODE
1. Precaution for using the test mode
It is necessary to adjust in the test mode.
Make clear the test mode after ending the adjustment.
2. Setting the test mode
The power supply code is inserted in the wall outlet.
Press the STANDBY/ON key
The input selector is put into the state of MD.
The set is put into the state of the standby once
pushing the STANBY/ON key.
While hold down REC key at the standby mode, press
STANDBY/ON key to set the power unit on.
The set is put into the state of the standby again pushing
the STANDBY/ON key.
While hold down EDIT/CLEAR NO key, press
DISPLAY key.
Press the STANDBY key to set the unit power on.
The display shows TEMP ADJUST indicating that the
test mode has been selected.
3. Exiting the Test Mode
Unplug the power supply coad from the wall outlet.
4. Basic operation of each operation key
All the operations are done with MULTI JOG key, REPEAT/YES key, and EDIT/CLEAR/NO key.
Key name
Function
MULTI JOG I<< >>I
MULTI JOG PUSH REPEART/YES
EDIT/CLEAR NO
Changes the parameter and test item.
Proceeds to the next step or finalizes the operation.
Returns to previous step or abouts the operation.
5. Selection of test mode
The multijog key is turned in the state of
2
- (8)
and a necessary test mode is selected.
It is possible to escape from the mode to other test modes by mistake when selecting by pushing the EDIT/CLEAR/NO key.
Test mode name Display
Function
TEMP ADJUST
LD POWER ADJUST
LD POWER CHECK
LOAD CHECK
SLEVEL CHECK
EFBALANCE ADJUST
FBIAS ADJUST
FBIAS CHECK
CPLAY MODE
CREC MODE
EEP MODE
POINT MODE
TEMP ADJUST
LD POWER ADJUST
LD POWER CHECK
LOAD CHECK
SLEVEL CHECK
EFBALANCE ADJUST
FBIAS ADJUST
FBIAS CHECK
CPLAY MODE
CREC MODE
EEP MODE
POINT MODE
Temperature compensation offset adjustment
Laser power adjustment
Confirmation of laser power.
Confirmation of lodhing operation.
Operation confirmation of object lens of pickiup
Traverse adjustment
Focus bias adjustment
Comfirmation of focus bias.
Continuous play mode
Continuous recording mode
The data memorized in non-volatile memory is rewritten.
In CREC mode and the CPLAY mode, the accessed address is changed.
(1)
(5)
(4)
(3)
(2)
(8)
(7)
(6)
(1)
(4)
(3)
(2)
In the following, the rotation of the disc dose not stop even if EJECT key is pushed.
Take out the disc pushing EJECT key after the rotation of the disc is stopped pushing EDIT/CLEAR/NO key once.
CPLAY MODE , CREC MODE
In the following, the function of the mis-deletion prevention becomes invalid.
Note when you use the disc not deleted for the adjustment.
LDPWR ADJUST, LDPWR CHECK, CREC MODE, CPLAY MODE, EFBAL ADJUST
and press the REC key.