C-1
Turn on the power.
Open the DVD tray.
Place the Up-Date Disc and close the tray. (Refer to SERVICING FIXTURE AND TOOLS)
The reading will start and the Fig. 1 screen will appear.
Press the PLAY key on the set.
The data reading will start.
And, "File Copying" appears on the TV monitor.
After the finishing of the data reading, tray will open automatically.
The display will change to “CLEAR”.
Remove the Up-Date Disc.
CHECK FOR THE FIRMWARE VERSION
Turn on the power, then press "CHECK SUM" key on the remote control JIG for more than 1 second.
Firmware version will be displayed on the screen.
When the changed version displays, the Re-write will be completed.
Turn off the power
RE-WRITE FOR DVD FIRMWARE
1.
2.
3.
4.
5.
6.
7.
Upgrade File DETECTED
Upgrade?
Press Play To Start
Fig. 1
Remote control JIG
Ref. No.
–––
JG176
Part No.
–––
APJG176112
Parts Name
Remote control JIG
Up-Date Disc
Remarks
Check for the Firmware version
Up-Date of the Firmware
Up-Date of the Firmware
JG176 Up-Date Disc
Fig. 2
Y E B 6 4 2 0 A
Fixed
Release date (Example: 2006.4.20)
Released times on the same date
A = October
B = November
C = December
AREA: WY
YEB6420A
10
02A5
1.16
1389FE
REAGION: 1
ROM NUMBER
REG CHK
SUM CHK
FL VERSION
CHIP VERSION
SERVICING FIXTURES AND TOOLS