DV-S757
2
14
3
4
1
1
19
2
3
4
DISASSEMBLING PROCEDURES-1
How to remove the DVD mechanism from chassis
Begin to pull the tray by rotating the gear pulley (14)
clockwise.
bottom view
Remove the tray panel.
tray panel
Remove the four screws which is fixing the dvd
mechanism to the chassis, and remove the
mechanism from chassis.
Remove the top cover
Remove the screw and remove the bridge (19).
screw
Begin to pull the tray by rotating the gear pulley (14)
clockwise.
How to disassembling the DVD mechanism
Remove the tray by pressing down the stopper
SW lever (17).
tray
Set the pick short switch to short side.
[NOTE]
Do not disconnect the FFC and wire before doing
this work.
short
open
stopper
1. Optical pick-up are parts which are easy to receive damage with static electricity.
Therefore, in case reassembly mechanism, take the measures against static electricity.
2. The number of ( ) in the explanatory note and in the figure shows Ref. No. of the exploded view.
