18
■
Confirming the settings
The [Exit Setup Navigator] is the final screen in the Setup
Navigator.
SETUP
ENTER
General
V2 Language
Audio Video1
Exit
Move
Select
Digital jack not compatible with 96kHz
Setup Navigator
96kHz PCM Audio
Amp Connection
No
Yes
Don't Know
SETUP
ENTER
General
V2 Language
Audio Video1
Exit
Move
Select
Changes are saved
Setup Navigator
Exit Setup Navigator
Save Changes
Delete Changes
Start Again
Settings:
Save Changes
(Factory setting)
Select to have the player make all of the necessary
audio, video and language settings according to
your responses in the Setup Navigator.
Delete Changes
Select to exit the Setup Navigator without changing
any of the system settings.
Start Again
Select to return to the [OSD Language] screen of
the Setup Navigator and do the settings again.
■
To change other player settings in the Setup
screen menus
The procedure for changing the settings in the Setup screen
menus is described on page 38.
■
Setting digital audio connections to an AV
amplifier or decoder
The [Digital Jack] screen establishes whether digital
connections have been made to an AV amplifier, receiver, or
external decoder. As there are numerous options available,
please refer to the instructions supplied with the component
the player is connected to determine what digital audio
formats can be decoded. If you have made no digital
connections, select [Not Connected].
Settings:
Dolby Digital
(Factory setting)
Dolby Digital/DTS
Dolby Digital/MPEG
Dolby D/DTS/MPEG
PCM
Not Connected
Warning
• Do not set [Digital Jack] to [Dolby Digital/DTS] or [Dolby D/DTS/
MPEG] if the amplifier does not have a DTS decoder. If you do
so, high volume sound may be output and damage your hearing
as well as speakers.
• Select [PCM] when you connect the player to a 2 channel digital
stereo amplifier. If you select other than [PCM], high volume
sound may be output and damage your hearing as well as
speakers.
Using the Setup Navigator
General
V2 Language
Audio Video1
Exit
Move
Select
Compatible with Dolby Digital
Setup Navigator
Digital Jack
Amp Connection
Dolby Digital
Dolby Digital/DTS
Dolby Digital/MPEG
Dolby D/DTS/MPEG
PCM
Not Connected
SETUP
ENTER
■
Setting compatibility with 96 kHz output
The [96 kHz PCM Audio] screen establishes whether or not
the AV component the player is connected to is capable of
processing an audio signal with a sampling rate of 96 kHz.
This screen only appears if connections have been made to
an external AV component as determined in previous screens.
Settings:
No
(Factory setting)
Select if the connected AV component cannot
process an audio signal with a sampling rate of 96
kHz.
Yes
Select if the connected AV component can process
an audio signal with a sampling rate of 96 kHz.
Don’t Know
Select if you are uncertain whether the connected
AV component can process an audio signal with a
sampling rate of 96 kHz.
Setting Up the Player
