17
CONNECTIONS
EN
S
Audio signals output from AUDIO OUTPUT (DIGITAL OPTICAL/COAXIAL) jacks
For the settings in the “Digital Out” to take effect, “HDMI Audio Out” should be set to “Audio Mute”. Otherwise, the
settings made in the “HDMI Audio Out” will have a priority, and the same signal as being output from the HDMI OUT jack
will be output from the AUDIO OUTPUT (DIGITAL OPTICAL/COAXIAL) jacks as well. (Except that Dolby Digital will be
output instead of Dolby Digital Plus and Dolby TrueHD, and DTS signal will be output instead of DTS-HD.)
*1
Full decoded.
*2
Only the independent substream is decoded.
*3
Dolby TrueHD stream is decoded.
*4
Only the Dolby Digital substream is decoded.
*5
Full decoded.
*6
Only the core substream is decoded.
• When playing back a BD-video which only contains the primary audio, the audio output will be the same case as the
“HD Audio Output” even if the “BD Audio Mode” is set to “Mix Audio Output”.
After you made all necessary connections, connect the AC cord to the AC INLET. Then connect the AC cord to the AC
outlet.
Insert the plugs securely. Incomplete connections will result in the generation of noise.
“Digital Out” setting
A
“Bitstream”
“LPCM”
“BD Audio Mode”
setting
A
“HD Audio Output”
“Mix Audio Output”
“HD Audio Output”
“Mix Audio Output”
Media
ª
Audio Source
ª
Which audio format can be output depends on the compatibility of the connected device.
BD-video
Dolby Digital
Dolby Digital
Dolby Digital
Downmix 2ch PCM
Downmix 2ch PCM
Dolby Digital Plus
Dolby Digital
Dolby Digital
Downmix 2ch PCM
*1
Downmix 2ch PCM
*2
Dolby TrueHD
Dolby Digital
Dolby Digital
Downmix 2ch PCM
*3
Downmix 2ch PCM
*4
DTS
DTS
DTS
Downmix 2ch PCM
Downmix 2ch PCM
DTS-HD
DTS
DTS
Downmix 2ch PCM
*5
Downmix 2ch PCM
*6
LPCM
Downmix 2ch PCM
Downmix 2ch PCM
Downmix 2ch PCM
Downmix 2ch PCM
AVCHD
Dolby Digital
Dolby Digital
Downmix 2ch PCM
LPCM
Downmix 2ch PCM
Downmix 2ch PCM
DVD-video
Dolby Digital
Dolby Digital
Downmix 2ch PCM
DTS
DTS
Downmix 2ch PCM
LPCM
2ch PCM
2ch PCM
MPEG
MPEG
Downmix 2ch PCM
Audio CD
/ MP3
PCM
2ch PCM
2ch PCM
DivX
®
Dolby Digital
Dolby Digital
Downmix 2ch PCM
PCM
2ch PCM
2ch PCM
DTS-CD
DTS
DTS
Downmix 2ch PCM
Note
• In order to output LPCM signal from AUDIO OUTPUT (DIGITAL OPTICAL/COAXIAL) jacks while outputting the HDMI
audio signal, set “HDMI Audio Out” setting to “HDMI Multi(LPCM)”.
Connecting the AC Cord
Supplied cables used in this connection are as follows:
• AC cord x 1
AC cord
AC110-240V, 50/60 Hz
this unit
AC outlet
E5L50ED_EN.book Page 17 Wednesday, June 10, 2009 1:02 PM