Onkyo D-509E, Инструкция по эксплуатации

Страница: 9 / 16

En-1
・ Before connecting the speakers, disconnect your amplifier’s
power cord from the wall outlet and set its volume control to
minimum.
・ The speaker’s rated impedance is 4
Ω
. Make sure you connect
an amplifier that is compatible with a 4
Ω
impedance.
■
Commonly - used connection
*1 Do not open the cover for the commonly -used connection.
Note
Fasten the jumper bar for HIGH - FREQUENCY firmly when it
loosened during the connection.
■
Bi-wiring the Speakers
(Supplied jumper bars are not used)
■
Bi-amping the Speakers
(Supplied jumper bars are not used)
Surface Coating
For mirror-smooth finish type, the surface color may look dull because a piano cleaner is applied to protect the surface. Please wipe
the surface with a cloth dampened with water and then wipe it with a dry cloth.
Note: Use a soft cloth to avoid the scratch.
Speaker System
D-509E
Instruction Manual
E
n
Connecting the Speakers
R L
*1
Red cord side
Right speaker Left speaker
Amplifier,etc.
For HIGH-FREQUENCY
Jumper bar
For LOW-FREQUENCY
R L
Red cord side
Red cord side
Right speaker Left speaker
Amplifier,etc.
Remove the
jumper bars
R L R L
Red cord side
Red cord side
Right speaker Left speaker
Remove the
jumper bars
Preamplifier
Power amplifier for low range Power amplifier for high range