25
Playing a CD
—Continued
Press DISPLAY on the unit repeatedly to change the display as follows:
Using the Remote Controller
The track
to play
Press the number buttons as
described in the examples below
to play back the desired track.
Press to stop playback.
Press to pause.
To resume playback, press Pause (
)
or CD
.
Press to switch the source to
CD.
Press
Press to locate a particular point
in a track.
Press and hold
to fast-forward or
to fast-reverse during playback or in
pause mode until you locate the desired
point.
Press to select the track to play.
• Press
to locate the beginning of
a playing or paused track. Press
repeatedly to select the previous
tracks in reverse order.
• To select the next tracks in order,
press
repeatedly.
For MP3 discs, you can also select
tracks in other groups.
Adjust the volume level.
Press VOLUME
to raise the level
and VOLUME
to lower the level.
Press to play.
Playback starts if the CD is in the unit. If
the unit is in Standby mode, it turns on
automatically.
Press to change display
information.
8
represents the tens digit.
For MP3 discs, tracks in the current
group can be selected.
10
34
Changing the Display Information
SOURCE
TRACK
C D
SOURCE
TRACK
REMAIN
C D
SOURCE
TOTAL REMAIN
C D
TRACK
•
During playback or pause
Lights up while the elapsed time of the playing track is displayed.
“REMAIN”
Lights up while the time remaining on the playing track is displayed.
“TOTAL REMAIN”
Lights up while the time remaining on the disc is displayed.
When performing Random playback, or the total time meets or
exceeds 99 minutes 59 seconds, “--:--” appears.
Note:
For information on MP3 discs, see page 28.
