26
Analog recording
Perform analog recording to record the signal input
to the analog input terminal of the CDR-201A. The
recording level can be adjusted manually.
Preparation
• Turn on the CDR-201A (see page 20).
• Place a recordable CD-R or CD-RW in the CDR-
201A (see page 20).
• Verify that the input dial and recording selection
button of the amplifier are set to the position of
the recording source.
1
Repeatedly press the INPUT button
until "Analog In" appears.
Proceed to step 3 if you do not wish to adjust
the recording level.
2
Start playback of the recording source.
3
Press the
o
REC button (or the remote
controller REC
o
button).
The level sync function turns on.
"Rec Setup" appears in the display followed by
the time display (the recording standby state).
4
Adjust the recording level
Refer to page 24, step 4 "Adjust the recording
level."
5
Stop playback of the recording source.
6
Press the
n
button (or the remote
controller
s
button) and start the
recording source.
Recording starts. If the entire disc becomes filled
with recordings, the CDR-201A automatically
stops.
To set the track numbers manually
Press the
o
REC button.
To pause the recording
Press the
n
button (or the remote controller
g
button). To resume recording, press the
n
button
(or the remote controller
s
button) when the time
display appears.
The CD recorder will stop, if the recording standby
state persists for 10 minutes or more.
To stop the recording
Press the
e
button.
AUDIO CD RECORDER
DISPLAY
STANDBY / ON
STANDBY
INPUT
CD
DUBBING
REC
FINALIZE
EDIT / NO YES
PUSH TO ENTER
MULTI JOG
CDR-201A
STANDBY/ ON
OPEN / CLOSE
RANDOM MEMORY REPEAT
NAME
ABC
DEF
2
3
1
SCROLL
GHI
MNO
J K L
4
5
6
CLEAR
DISPLAY
ENTER
PQRS
TUV
W XYZ
10/0
>10
7
8
9
REC
RC-448C
INPUT
o
REC
s
EDIT/NO
n
YES
o
REC
Proceed to step 6 if you do not wish to adjust
the recording level.
º
INPUT
REC
REC
CDR-201A
RC-448C
