38
Setting the Clock
The AccuClock function sets the clock automatically the
very first time the CBX-100 is plugged into a wall outlet
(see page 19).
If for some reason the clock cannot be set automatically,
use the following procedure to set it manually. Note that
when the clock is set manually, it will not be updated
automatically.
Displaying the Day and Time
To display the day and time, press the remote controller’s
[CLOCK CALL] button. Press the button again or per-
form another operation to cancel the time display.
If the CBX-100 is on Standby, the time will be displayed
for 8 seconds.
While the CBX-100 is on, the day and time are displayed
continuously.
Using the 12- or 24-hour Format
To change the time format between 12-hour and 24-hour,
while the time is shown on the display, press the [DIS-
PLAY] button.
Displaying the Time in Standby Mode
To set the CBX-100 so that the time is displayed contin-
uously while it’s on Standby, turn on the CBX-100, and
then press and hold its [STANDBY/ON] button for 2
seconds. To turn off this feature, repeat this procedure.
Note that having the time displayed in Standby mode
will consume more power.
Setting the Clock Manually
1
Press the [TIMER] button repeat-
edly until “Clock” appears.
2
Press [ENTER].
3
Use the Previous and Next [
]/
[
] buttons to select
ManualAdjust.
Tip:
If the AccuClock function is working,
pressing the [YES/MODE] button will
set the clock based on the RDS CT infor-
mation (see page 39, step 6).
4
Press [ENTER].
/
ENTER
TIMER
EDIT/NO/
CLEAR
CLOCK
CALL
DISPLAY
STANDBY/ON
Number
button
5
Use the Previous and Next [
]/
[
] buttons to select the day of
the week.
You can select: SUN, MON, TUE, WED,
THU, FRI, or SAT.
6
Press [ENTER].
To change the time format between 12-
hour and 24-hour, press the [DISPLAY]
button.
7
Use the remote controller’s num-
ber buttons to enter the current
time.
You can also use the Previous and Next
[
]/[
] buttons.
For the 12-hour format
, use the remote
controller’s [
>
10]
button to select A.M.
or P.M.
8
Press [ENTER].
The clock is set and the second dot starts
flashing.
CBX-100_En.book Page 38 Friday, September 15, 2006 9:34 AM
