35
Listening to the Radio
—Continued
Selecting DAB Stations
• You can also use the CD/HDD receiver’s INPUT
SELECTOR button to select DAB stations.
• Once a DAB station has been preset, these front panel
controls will select presets. To use them to select DAB
stations, select DAB as the input source, and then turn
the MULTI JOG dial.
Displaying DAB Radio Information
Press the remote controller’s [DISPLAY] button repeat-
edly to display more information about the selected
DAB station.
1 DLS (Dynamic Label Segment)
When tuned to a station that’s broadcasting DLS text
data, the text will scroll across the display.
2 Program Type
Displays the type of program.
3 Bit Rate and Audio Mode
Displays the station’s bit rate and audio mode (ste-
reo, mono, or joint stereo).
4 Signal Quality
Displays the signal quality.
0–59: Poor reception
60–79: Good reception
80–100: Excellent reception
5 Multiplex Name
Displays the name of the current multiplex.
6 Multiplex Number and Frequency
Displays the number and frequency of the current
multiplex.
1
Press the [BAND] button to
select “DAB”.
2
Use the Fast Reverse and Fast
Forward [
5
]/[
4
] buttons to
select the DAB stations.
If a secondary service is available, a
right angle bracket (>) is displayed.
Press the Fast Forward [
4
] button to
listen to the secondary service.
While the secondary service is selected,
a left angle bracket (<) is displayed.
Press the Fast Reverse [
5
] button to
return to the primary service.
When you select a station that you’ve
selected a lot in the past, the letter
F
(short for
Favorite
) is displayed.
If you select a station that cannot be
received properly, a question mark (?)
is displayed.
DISPLAY
( TUNING / )
/
BAND
ONKYO S1 F
ONKYO S1
ONKYO S1 F
“F”
ONKYO S1 F?
“?”
P . Level =3
(Scroll)
Science
48kbps Mono
Qua l i ty : 94
ONKYO DA
11D 222. 0MHz
