Onkyo A-9110, Инструкция по эксплуатации

Страница: 19 / 68

19
En
Others
When automatic standby is on, the unit automatically
switches to standby mode after 20 minutes of no audio input
without any operations (Default value: North American
models are "Off", others are "On".).
1. Press SETUP on the remote controller.
2. Press
D
/
C
on the remote controller several times to
make the "DIRECT" and "PHASE MATCHING BASS"
indicators either blink or light.
0
The indicators blink or light and the current setting
value is displayed.
3. Press
B
/
A
on the remote controller to switch auto
standby on or off.
- On: "DIRECT" and "PHASE MATCHING BASS"
indicators are blinking
- Off: "DIRECT" and "PHASE MATCHING BASS"
indicators light
4. To exit the settings, press SETUP.
0
The setting mode ends after 5 seconds elapse with no
operations performed.
0
60 seconds before switching to standby mode, the input
source indicator for the currently selected source starts
blinking.
0
Depending on the connected device, the auto standby
feature may not engage due to factors such as noise.
Useful functions
Setting auto standby
(LIGHTING)
OFF
(BLINKING)
ON
3
1
2
SETUP
/ / /
SN29403405_A-9110_En_1806XX.book 19 ページ ２０１８年７月５日 木曜日 午後２時４３分