5
Listening
Remote Control
Note: Keys not described are
not intended for the machine.
It is normal if there is no respons
pushing them.
.
IN P U T
L E V E L
T U N IN G
P R O G
P R E S E T
R A N D O M
B A N D
V O L U M E
D IS P L A Y D IM M E R
M U T E
S C A N
E N T E R
X R C - 1
A M P
T U N E R
CD
/
S A C D
C D
D A C
R E P
A - B
1
2
3
5
6
7
4
8
9
0
IN F O
M E M
1 0
Switch
Set switch to CD
Direct selection digits
Fast rewind/fast forward keys
Previous/next keys
Stop key
Play/pause key
Input selector key
Replay key
A-B segment replay key
Random play key
Mute key
Brightness adjustment key
Description remote control buttons
1. Connect CD player to the amplifier with appropriate cables .
2. Lift disc cover and disc press and then put the disc in. Put disc press and disc cover back.
3.
Once the loader is started, screen shall display total tracks and time.
4. Press ( ) button on machine or key on remote control to play all contents on the disc.
USB Setup: 1. Connect the USB cable from PC to the rear panel of the unit.
2. Turn on the unit and choose the USB source by press the INPUT on the top panel or the
CD INPUT on the remote control.
3. Install the driver software into the PC from the“USB driver disc”.
4. Setup the“SOUND”option on the PC, set the“Speaker XMOS XS1-L1 Audio”as the default device.
Programmed play key
Track scan key
Scan button
: During stop mode, press (SCAN) key on remote control, screen shall display “SCAN” in the top left
corner, indicating track scan is functioning. Track scanning function plays the first ten seconds of a track sequentially
untill all tracks are played. Number of corresponding track shall be displayed on screen. Once all tracks are scanned,
the machine will be in stop mode.
To cancel during track scanning, press (SCAN) key or ( ) key once.
To operate the remote
control requires two battery of
AAA 1.5 V, which are not included.
Load/eject
