3. To turn off the machine, first turn volume knob to min and then set power switch
to OFF.
4. If you do not intend to use the amplifier for a long time, please unplug the AC power cable.
Input switching
Volume adjustment
Output protection
Troubleshooting
Fault
No power
No sound
No remote control
Possible causes
Poor connection in socket or no utility.
Audio cable not connected.
Volume knob is at min.
Remote battery misplaced or depleted.
Solution
Check power source and connect socket tightly.
Note: If the amplifier still exhibits a fault after checking the possible causes, please contact your local
distributor or service centre. Return the machine to service centre if necessary.
Reinstall or replace batteries.
Re-connect audio cables.
Adjust volume to preferred level
Turn the SELECT knob on the panel or press the INPUT
/
keys on the remote control to switch to
the desired audio input. The input indicator on the panel will be illuminated accordingly.
Use the VOLUME control on the front panel of the amplifier to adjust volume, counterclockwise for
volume down and clockwise for volume up. Alternatively use /- keys on remote control.
Note: Before turning on the amplifier, check that the volume control is set to a low level in order not to
damage the speakers.
If the amplifier output is overloaded, a relay in the protection circuit will shut off immediately.
Meanwhile all indicators on the front panel will be on and the volume knob will be dimmed. In such
circumstances the amplifier power must be turned off. Wait for 5 minutes before turning on the amplifier
again.