4
Operating instructions
Always choose a safe location for the heater, keeping in mind the safety precautions
outlined. Ensure that all packaging has been removed from the unit before use.
Place the heater on a level, hard and non flammable surface.
Plug the power cord into a suitable 220-240V ~ 50Hz wall outlet. The red indicator light
will come on to indicate that there is power to the unit or the unit is plugged in.
Power knob Function:
O
Heating Power is not applied to unit
800W + Fan
Provides approx 800W heat output with fan boost function
1600W + Fan
Provides approx 1600W heat output with fan boost function
2400W + Fan
Provides maximum 2400W heat output with fan boost function
Your heater is equipped with three heat settings .To achieve low heat output or 800W
of heat from your heater; turn the power knob to “800W” position . The middle element
will now glow. In this position, the element will glow continuously and for safety reasons
the thermostat can not be adjusted to switch it off.
To achieve medium heat output or 1600W, turn the thermostat control knob to the
maximum (fully clockwise) and turn the power knob to position “1600W”. The rear and
middle elements will glow, the front element will not.
To achieve full heat output or 2400W of heat, turn the power knob to position “2400W”
and the thermostat control knob to the maximum. Your heater is now running on full
power. All three element bars will now glow.
Note:
Low heat output or 800 watts of heat can also be achieved by turning the power
knob to either position “1600W” and “2400W” and the thermostat control knob to
minimum (fully anticlockwise)
Temperature control
Your heater is also fitted with a thermostat. This is the large rotary knob situated below
the power knob. Your heater will maintain the desired room temperature you select
by turning the knob. By turning the knob clockwise you will maintain a warmer room
temperature. By turning the knob anti-clockwise your heater will maintain a cooler
desired room temperature.