
Remote
ONIX DNA
10
Source/Standby
Decrease Volume
Increase Volume
Your remote will look as shown below and there are just a couple of very useful
things to know about our simple yet extremely well designed remote.
This button will allow you to change your source (input) by the click of one button
instead of many, making all your inputs available to you by hand.
We have also added in the Standby feature. So by holding this button down for 4
seconds, you will send your DNA-50 into standby. To bring it out of standby, simply press
the same button once. There is of course the option to fully turn off your amplifier with
the switch on the back, but should you only want to use a standby feature, the remote is
the only way of achieving this unless you fully turn off your unit and then turn it back
on.
Source/Standby
As shown in the diagram, operating the volume level is very simple. When either turning
up or down the volume you will the volume knob physically turn as the green LED
rotates with it.
Volume Controls