8
After sales support: 1300 886 649 (AU) | 0800 836 761 (NZ)
The Power LED does
not light up.
• Ensure the batteries are installed correctly.
• Replace the batteries, if necessary.
No sound.
• Switch both the pool speaker and transmitter off, then
turn them on again to reset both units.
• Make sure the audio cable is connected securely to the
music source.
• If too much water is retained in the speaker grill, gently
shake the device and allow the water to drain away.
• Ensure the correct music source is playing.
• The speaker volume is set too low, adjust the volume to
an appropriate level, or adjust the volume on your source
device to maximum.
Distorted sound.
• There is water retention inside the speaker grill, gently
shake and drain it away.
• The battery capacity is low, replace the batteries.
• The speaker is too far away from its transmitter, move the
two devices closer together.
Wireless interference.
• Move the transmitter and receiver away from other
wireless devices.
• Make sure there are no other wireless devices operating
in between the transmitter and receiver.
Interference
problems.
To correct any interference:
• Reorientate or relocate the receiving antenna.
• Increase the separation between the equipment and
receiver.
Transmission
problems.
Normal operation should be possible within a distance
of 30m (outdoors, line-of-sight), but obstacles and other
electrical appliances may cause problems. Make sure no
potential obstacles (furniture, constructions, walls etc.)
are obstructing transmission and switch off any electrical
appliances that may cause disruption to the transmission
of radio waves.
FAQs
If none of the above help you solve the problem, consult a qualified TV technician
or contact the after sales support line.
