Listening
1. Connect CD player to the amplifier with appropriate cables .
2. Press ( ) to open the disc loading area, insert an audio-cd, press ( ) to close the loading disc area then press ( )
to start the CD.
3.
Once the loader is started, screen shall display total tracks and time.
4. Adjust the volume of the amplifier by using the VOLUME of the control.
Remote Control
Note: Keys not describe
are not intended for the machine.
It is normal if there is no respons
pushing them.
.
To operate the remote
control requires two battery of
AAA 1.5 V, which are not included.
1. Power input socket with fuse
2. USB digital input
3. Digital coaxial output (RCA S/PDIF)
4. Right channel analog output
5. Left channel analog output
IN P U T
L E V E L
T U N IN G
P R O G
P R E S E T
R A N D O M
B A N D
V O L U M E
D IS P L A Y D IM M E R
M U T E
S C A N
E N T E R
OPEN
/
C L O S E
X R C - 1
A M P
T U N E R
CD
/
S A C D
C D
D A C
R E P
A - B
1
2
3
5
6
7
4
8
9
0
IN F O
M E M
1 0
Switch
Set switch to CD
Direct selection digits
Fast rewind/fast forward keys
Previous/next keys
Stop key
Play/pause key
Load/eject
Replay key
A-B segment replay key
Random play key
Mute key
Brightness adjustment key
WARNING
TO PREVENT FIRE OR SHOCK HAZARD
DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE
CLASS 1 LASER PRODUCT
APPAREIL LASER DE CLASSE 1
PRODUCTO LASER CLASE 1
USE ONLY WITH A 250V FUSE
~
/
220V 50Hz
AC IN
FUSE 100V - 120V: T2AL
220V - 240V: T1AL
DIGITAL OUT
ANALOG OUT
L
R
SERIAL NO.:
COAXIAL
MODEL: CD-15A
POWER CONSUMPTION: <30W
COMPACT DISC PLAYER
USB IN
ONIX ENGLAND ELECTRONICS LTD
1
3
4
5
2
USB Setup: 1. Connect the USB cable from PC to the rear panel of the unit.
2. Turn on the unit and choose the USB source by press the INPUT on the front panel or the
CD INPUT on the remote control.
3. Install the driver software into the PC from the“USB driver disc”.
4. Setup the“SOUND”option on the PC, set the“Speaker XMOS XS1-L1 Audio”as the default device.
Input selector key
4
