9
1300 886 649
Model: AUHR-014 Product Code: 49203 03/2015
www.tempo.org
AUS
Getting Started
The charger base is not waterproof, ensure the radio is
dry before connecting it to the charger.
Before First Use
• Carefully remove the Handheld UHF CB Radio from its
packaging. If there is any visible damage, do not attempt to
operate it. Contact our after sales support centre for advise
using the details on the bottom of the page.
• Your new Handheld UHF CB Radio comes with a rechargeable
Li-Ion battery ready installed. Before first use, fully charge the
battery for 10 to 14 hours with the unit turned off while charging.
Charging the Battery
The AUHR-014 must be used with its original charger base and
AC adaptor or car adaptor.
• Make sure the unit is turned off.
• Connect the jack of the AC adaptor or the car adaptor to the
socket at the back of the charger base. Make sure the jack is
fully and firmly inserted into the socket.
• Connect the AC adaptor to the mains power supply or the car
adaptor to the car cigarette lighter socket. The LED indicator on
the charger base will turn green.
• Place the unit into the charger base. The LED indicator on the
charger base will turn RED and the battery charging symbol will
flash on the LCD display.
• Once the battery is fully charged, the LED indicator will turn
green. Unplug the adaptor and store it safely. Turn the unit on.
Turn the page for some important notes about recharging.
When the battery status icon flashes and "bA low"
shows on the LCD, the battery capacity is low and you
need to recharge the battery.