Onix AT-03FM, Инструкция по эксплуатации

Страница: 9 / 16

9
After Sales Support
Telephone:
1300 886 649
Email:
info@tempo.org
Instructions
WARNING: Do not use the car adaptor to charge your mobile phone directly!
The car adaptor’s output voltage is 12V. Attempting to charge your mobile phone via
the car adaptor directly will put you at risk of destroying the mobile phone.
• Turn on your car radio and tune to a channel that only contains static, with no
interference from other radio stations.
• Turn on the FM transmitter by pressing and holding the ON/OFF button.
• Press the [M] button and the frequency number displayed on the screen will start
blinking.
• Press the [+] or [-] button to tune the FM transmitter to the same frequency as the
car radio.
• Press the [M] button to confirm the frequency.
Once the FM transmitter and car radio are tuned to the same frequency, the audio
signal will be clear and free from static and interference. If interference or static is
present in the sound you hear, you may need to try a different frequency.
NOTE:
When using the device in the car you may at times need to change the
operating frequency band, as interference from other stations may change as
you travel.
FM TUNING
PHONE ATTACHMENT
PHONE CONNECTION
The adjustable clamp has a width range of 6 to 8.7cm to accommodate most of
today's mobile and smart phones.
• Press the release button on the side of the cradle to extend the clamp arms.
• Place your phone onto the cradle and press on the clamp arms to grip the phone.
Then adjust the cradle to a proper angle for your easy operation while driving.
• Insert the 3.5mm plug attached to the FM transmitter base into the headphone
socket or auxiliary output of an audio source. Now the mode will change to “AUX”
and the sound out of your mobile phone or other audio source will be played
through the car’s sound system.
• When using the phone, connect and disconnect mobile calls using your mobile
phone as you normally would. Make sure to speak loud and clearly toward
the phone.