Figure 1.2
Front
Back
**Remove spiked feet from RS 550/750 base before proceeding.
STEP 3: Using large Philips head screw driver, attach small Riser platform to
base of RS 750 using included 1.25” machine screws. Machine screws will
drill directly into threaded inserts on RS 550/750 bottom.
STEP 4: Using remaining wood screws, from the underside up, screw large
(bottom) Riser base into pre-drilled holes in base of 2” dowels.
STEP 5: Insert spiked feet into threaded inserts on underside of large Riser
base, and stand speaker upright. NOTE: Spikes are to be used ONLY in low
traffic areas where speakers will not be touched. Using spiked feet will
significantly reduce the stability of your speakers. If placed in high traffic
areas, or if in danger of being inadvertently bumped (pets, small children,
etc.), use included rubber feet on large base
instead
of spikes. See Figure 1.3.
Figure 1.3
STEP 6: Sit down and listen!
**Should you need any further technical assistance, please contact our
support department at
or 1-877-543-7500 option 2.
Page 2
Содержание RS 550
Страница 3: ......
