5
4
REMOTE OVERVIEW
OPERATIONS
1.
Open back cover and put 2 Nos. AAA size alkaline batteries.
2.
The remote signal can be reached up to six meters from the Air Conditioner Receiver.
3.
When the button is pressed on remote, Unit will “beep” once, indicating the receipt of
signal. If no “beep” sound is heard, press the button once again.
4.
Remove batteries if remote control has not been used for long time.
5.
Heat mode is not available with all models.
Operating Your Air Conditioner:
Your Window Air Conditioner can be conveniently operated using the intelligent cordless
remote control.
1.
Switch on the MCB.
Press
ON/OFF
button on remote handset to switch ON the AC.
All icons will glow once.
Your AC switches on with parameters that were set before power was switched
off. The unit receives the signal with "BEEP" tone and your AC starts operation.
Time Delay: To protect the compressor, a time delay is incorporated in the circuit.
The Time Delay ensures that the compressor switches ON only after a delay of about 3
minutes.
2.
Press the
“MODE”
Button for Auto, Cool, Fan, or Dry Mode selection.
3.
Press the
"FAN”
Button to set the Fan Speed. Each press changes the fan speed
from Low- Med - High-Auto Fan speed. The selected fan setting symbol can be
seen on the LCD.
4.
The Set Temp. is displayed on LCD, Press button ” “ to increase and “ “ to the
decrease the temperature.
5.
To switch off the AC, press the same
ON/OFF
Button.
Setting the Desired Room Temp.:
You can set the temp. at which you would like your room to be.
O
Press "
" button to increase the set temp. On every press, the temp. increases by 1 C.
O
Press "
" button to decrease the set temp. On every press, the temp. decreases by 1 C
The two digit display shows the set temp. on LCD.
O
The setting temp. range is from 17- 30 C.
Your window AC operates in one of four modes, AUTO-COOL-FAN-DRY. The modes
button cyclically chooses between these operating modes.
TEMP
AUTO
COOL
DRY
FAN
HIGH
MED
LOW
MODE
FAN SPEED
SWING
SLEEP
TIMER ON
TIMER OFF
ON/OFF
RESET LOCK
SET TEMPERATURE( C)
RESET BUTTON
TEMPERATURE
ADJUSTMENT
OPERATION
DISPLAY
OPERATION
MODE
SWING
FAN
SPEED
ON / OFF
TIMER
ON
TIMER
OFF
SLEEP BUTTON
LOCK BUTTON
Signal
ejecting
window
BACK VIEW
