Onida OV-R224P/Na-M, Руководство пользователя

Страница: 25 / 35

23
Wired Remote Controller Operation Procedure
2） Timer setting
（ Fig.14 ， hereinafter will be displayed according to
the function of the wired remote controller.
）
At stopping, press TIMER ON button, set ON TIME, at operating,
press TIMER OFF button, set OFF TIMER.
When it is not timed
（
i.e. there is no show content in the timing
display field ） ， press TIMER ON ， the liquid will display the
pattern of “ xx.x hour ” ， “ ” and “ HOUR ” the samples
will be flashed in every 0.5second on and on ， at this time press
or button to set time 。 After using or
button
，
adjust to the desired temperature, then press the TIMER
button ， at this time “ ” and “ HOUR ” will not flash ， that shows
the TIMER ON has been set.
After power on, to press the TIMER button once ， LCD will display “ 0.0 HOUR ” ， The sign of “ ” and
“ HOUR ” will twinkle ， when repress the TIMER button ， the LCD will not display the sign ， that shows the
TIMER ON has been canceled.
When the TIMER ON has been set,
（
i.e. the sign of
“ ”
and
“
HOUR
”
will twinkle continuously
） ，
if press the
TIMER button once more ， LCD will show “ xx.x HOUR ” （ ： Note “ xx.x ” is the time of last setting ， after power
on it will be cleared automatically
） ，
the sign of
“ ”
and
“
HOUR
”
will twinkle continuously
，
at this time could
press or button for time setting ， or press the TIMER button again to confirm the function of time.
The range of TIMER ON and TIMER OFF is from 0.5hour to 24hour. Press or button for each
time ， the set time will be increased or decreased 0.5hour ， hold the press or button ， it will increase
0.5hour or decrease 0.5hour every other 0.5second. The setting range of and is from 0 to 24 ，
and they are circulatory.
button ： 0.0 0.5 1.0
. . . . . .
. . . . .
······
23.5
24.0
button
：
0.0
0.5
1.0 23.5
24.0
NOTE
：
The Fig. shows the relevant display area.
Fig3
ON/OFF
TIMER
FAN
MODE
SLEEP
Fig.14