onga Whispair 120, Руководство пользователя

Страница: 8 / 18

8
Operating your Whispair
Plus
Airswitch Models
1. Ensure power outlet is switched ON.
The
Whispair
Plus
works on a 3 step sequence of the designated air
button:
PRESS 1. ON; continuous Vari-speed cycle begins.
•
Highest speed to lowest speed to highest speed again.
•
4 speed steps at 8 second intervals.
•
High to Low = 32 seconds.
PRESS 2. preferred airflow is selected and maintained.
PRESS 3. OFF. Blower stops and moves into sanitation mode (Spa
bath models only).
Press the designated air button fitted to your spa to turn the
Whispair
Plus
ON.
The vari-speed technology incorporated into your Whispair
Plus
allows
maximum air flow at initial startup. Your Whispair
Plus
automatically
ramps down to a light relaxing air flow and then ramps up to the maximum
air flow. This vari-flow cycle is continuous and repeats itself
approximately every 30 seconds.
2. Your choice of air flow can be obtained by simply pressing the
designated air button a second time when the air flow is at your
preferred setting.
3. Press the designated air button a third time to stop the Whispair
Plus
.
The inbuilt technology returns the settings to the start sequence again.
Sanitation ( Spa bath versions only)
Your Whispair
Plus
has been programmed to aid hygiene.
Once the Whispair
Plus
is turned off by the dedicated air button, it will auto-
matically start approximately 10 minutes later (allows time for the water to drain
from the bath) to expel water from the air lines. This sanitary purge will last for
approximately 30 seconds and then shut down completely. You can manually
stop the purge cycle by pressing the dedicated air button. Your
Whispair
Plus
returns to the standby mode, waiting for your next spa experience.
Note: the Whispair
Plus
sanitary purge begins at the softest airflow and
increases to the maximum airflow minimising the water splash purged from the
jets..