AUX IN
9
5 AUXILIARY INPUT
A 3.5mm auxiliary cable comes with the speaker, with which you may use the speaker without
Bluetooth. In this case, Bluetooth will be disabled, but speaker sync features remain fully
functional.
1. Plug one end of the auxiliary cable into the speaker auxiliary port.
2. Plug the other end of the auxiliary cable into your device audio jack.
(Ensure audio jack is not obstructed by any protective case or accessories)
3. When auxiliary cable is plugged into speaker, you will hear an audible
chime and the auxiliary indicator will illuminate.
AUXILIARY CABLE
Uncover the rubber cover to access port.
Green light indicates auxiliary input
6 LIGHT DISPLAY
NOTE: Color-changing Pulse feature ONLY works when playing the music.
By default, the lantern will turn off automatically after 2 hours to extend run time. If you want
the lantern to illuminate for longer, please set the timer.
A. LANTERN ON /OFF AND BRIGHTNESS CONTROL
1. Press the LIGHT button to turn the lantern on
.
2. Each time you press the button again, the brightness of the light increases
（
20%, 40%, 60%, 80% and 100%
）
3. Press button a total of 5 times to reach maximum brightness, then press
the button to turn the light off.
(Brightness level settings correspond to 20%, 40%, 60%, 80% and 100%).
LIGHT DISPLAY ON & BRIGHTNESS BUTTON
press to cycle through brightness settings
2H
4H 6H
8H
COLOR
TIMER
TX
RX
2H
4H 6H
8H
COLOR
TIMER
TX
RX
INDICATOR LIGHT