OneVue B1004Z Скачать руководство пользователя страница 16

Страница: 16 / 23

Specifications Sync Bluetooth™ Analog Clock

Battery-powered
models

Typical five (5) year battery life. Battery life is based on operating conditions and may vary due to installed site conditions.

9" (22.86 cm) model requires two C-cell alkaline batteries (not included)

12.5" (31.75 cm) and 16" (40.64 cm) models require two D-cell alkaline batteries (not included)

AC-powered models

Power Supply 100-240 VAC, 18 in. (45.72 cm) cord with plug

Single-Sided: 10mA @ 120 VAC

Bluetooth® Wireless
Communication
Protocol

Bluetooth® Low Energy (BLE) Wireless Technology, version 4.1

Bluetooth Range: up to 100 feet (30 meters)

Operation

• Clock automatically connects daily to an available Sync Bluetooth mesh network to receive UTC time and synchronize its

time to its Time Zone offset and DST rules, downloads OneVue setting updates and send its current operating status.

• Automatically adjusts for Daylight Saving Time (DST)
• Automatically performs a daily midnight hand verification check. When check fails for three (3) consecutive days, the

clock enters a hand position failure status.

• If power is interrupted, the clock stops until power resumes. Upon resumption of power, the clock self-corrects to the

current time.

Environment

Operating Temperature Range: 32° to 95° F (0° to 35° C); indoor use only

Storage Temperature Range: -4° to 158° F (-20° to 70° C)

Certifications

FCC, CE, and IC compliant

Bluetooth® SIG Certified. Reference Qualified Design 62891, 03 February 2017

Page 16

Содержание B1004Z
























Результаты поиска

Содержание B1004Z

Отзывы:

Бренды по названию

Популярные бренды

OneVue B1004Z, Инструкция по установке

Результаты поиска

Содержание B1004Z

Отзывы:

Бренды по названию

Популярные бренды