ONEUW ONE160x Скачать руководство пользователя страница 19 | Manualshive

Страница: 19 / 54

ONEUW ONE160x Скачать руководство пользователя страница 19

GETTING STARTED - POWER SUPPLY MANAGMENT

6.0 Strobe switching on/off

The strobe is switched on and off by pressing the MAIN and INPUT

lever selector simultaneously.

Turning on the unit is indicated by the visual indications on the display

and by a single beeping sound after which the lever selectors can be

released.

When the strobe is switched on, the following information are showed

on the display:

-Firmware release number and strobe version
-Battery charge status

Together with this information, all the indicator lights on the display,

MAIN section on the left and INPUT section on the right, light up at the

same time for a check.

The strobe is switched off by pressing the MAIN and INPUT lever

selectors simultaneously for a few seconds. A first beeping sound is

emitted after one second and keeping the pressure on the lever

selectors a second acoustic signal will warn that the lever selectors can

be released. The strobe will turn off after displaying the battery charge

status on the display.

i

The left and right lever selectors, operated either individually or

together, give different commands depending on the operating

time that we can classify as short (one pulse) or long (one or more

seconds depending on the command).

14

«
...
17
18
19
20
21
...
»

Содержание ONE160x























































Отзывы:

Нет отзывов