7
Connecting the Solar Panels
How to Recharge the ONEUP 360 Using Solar Panels
For full step-by-step instructions about how to connect ONEUP 360 with solar panels, please refer to the Solar Panel User
Guide.
The ONEUP 360 can support a 10-25V DC input. When the input exceeds 25V, the ONEUP 360 overvolt-
age protection will be activated. Overvoltage may damage the product. Users should read these instruc-
tions carefully because any incorrect use of solar panels that leads to product damage will void the war-
ranty.
Charging Method 1
ONEUP 360 Charging Port
XT60 Connector
ONEUP 360
MC4 Connector
SOLAR PANEL-21.6V
Users can connect a solar panel as shown in Example 1. DO NOT attempt to connect more than one solar panel in series.
1. Connect the solar panel to the MC4 to XT60 Solar Charging Cable. Connect the XT60 connector to the ONEUP 360 XT60
input port to charge the ONEUP 360. Users can connect up to 2 sets of solar panels in parallel to the MC4 port as shown
in Example 2.
2. If you want to connect 2 sets of solar panels, connect them with our solar MC4 parallel connection cable and connect
the solar MC4 parallel connection cable to the MC4 to XT60 Solar Charging Cable. Then Connect the XT60 connector to
the ONEUP 360
XT60 input port to charge the device. The parallel connection cable is an optional accessory that is sold
separately.
Note: The Solar MC4 Parallel Connection cable is an optional accessory that needs to be purchased separately. The charging
methods below are with respect to using the 110W Solar Panel.
1. Recommend Charging Method
