background image

25

ERROR MESSAGES AND DETAILS ABOUT YOUR SYSTEM

 

Message 

What it means 

What to do

No result in memory, such as the 

first time use of the meter.

or

,

Your meter was unable to recall this 

result. 

You can still perform a blood glucose test 

and get an accurate test result. Contact 
OneTouch® Customer Care 0800 121200 (UK)  
or 1800 535676 (Ireland) to report this 

occurrence if this is 

not

 your first time use 

of the meter.

Error message indicates there is a 

problem with the meter. 

Do Not 

use the meter.  

Contact OneTouch® Customer Care  
0800 121200 (UK) or  
1800 535676 (Ireland).

Error message could be caused 

either by a used test strip or a 

problem with the meter. 

Repeat the test with a new test strip; see 

Section 3, Testing your blood glucose. If 

this message continues to appear, contact 
OneTouch® Customer Care 0800 121200 (UK)  
or 1800 535676 (Ireland).

Error message indicates that the 

blood or control solution sample 

was applied before the meter was 

ready. 

Repeat the test with a new test strip. 

Apply a blood or control solution sample 

only after the flashing blood drop icon 

R

 

appears on the display. If this message 

continues to appear, contact OneTouch® 

Customer Care 0800 121200 (UK) or  

1800 535676 (Ireland).

Содержание UltraEasy

































Отзывы: