INSTRUCTIONS
5
Battery Installation
Manual Mode - No Brakes
Slide the skinny part of the battery into the slot on the side arm. Make
sure the battery is inserted all the way, so the red and black plug
connectors show at the bottom of the side arm case. Then plug in the
cable from the black box under the seat into the battery. Match the
red with red and black with black part of the plugs.
Move the red lever on the inside of each rear wheel motor, push it
forward until you feel a click. Then the wheel will spin free, so the chair
can be push just like a manual chair. Repeat the same process for both
wheels.
1.
3.
How to Install & Operate
Joystick Installation
Power Mode - Electromagnetic
The Joystick can be installed on the left or right side armrest. Insert the
Joystick into the tube of the armrest. Tighten the Thumb Screw bolt on
the bottom-side of the armrest. Make sure this bolt is snug to hold the
Joystick in place.
Move the red lever on the inside of each rear wheel motor, pull it
backward until you feel a click. Then the wheel motor will be engaged
and power will move each wheel. Repeat the same process for both
wheels.
2.
4.
