16
V - Systems Owner’s Manual © O.A.S. 2010
XII. Wall Bracket Assembly
1. The collector will seem quieter if the outlet is aimed away from the
area people tend to work. Slots in the brackets are .406” x 1.00”.
Note: Bolts included to mount bracket to collector. Hardware NOT
included to mount to wall.
2. Hold bracket against wall with top of plate at 56” (35 gal.) or 68” (55
gal.) Mark where mounting holes fall. Mount wall bracket. For wall
mounting, the bolt centers on the brackets are at 16” to accomodate
most wall stud spacing. See Fig. 1 & 2. Use a level to ensure straight-
ness.
3. Attach bracket to wall with lag screws, concrete anchors, or other
suitable hardware. See Fig. 2 & 3. Note: When installing the brackets on
a concrete wall, mount 2 x 4’s between wall and brackets to stabilize and
dampen vibration.
4. Position Angle Ring around top of cone over bracket. Line up slots in
angle ring on cone with slots in wall bracket with one in back and one on
each side.
5. Attach tightly with bolts.
56” (35 gal.) or 68” (55 gal.) to top of plate.
Distance for minimum mounting height.
23 1/2”
16”
16”
