11
Oneida Air Systems, Inc.
Assembly Instructions (Continued)
FIG. 7a
7
If you are installing a 21" Cyclone, attach the
two remaining Short Braces (E) on top of the
two upper Long Braces and secure in place
with four Bolts (D2), four Washers (D3), and
four Whiz-Nuts (D4) for each Short Brace
[FIG. 7a].
If you are installing a 23" Cyclone, attach the
two Cyclone Supports (F) underneath the
two Long Braces (C) at the top of the Stand
and align its holes with the inside pair of bolt
holes [FIG. 7b] before securing in place with
eight Bolts (D2), eight Washers (D3), and eight
Whiz-Nuts (D4) for each Cyclone Support.
Note: For ease of installation, raise the top of
the stand assembly with blocks to install the
hardware.
If you are installing a 28" Cyclone, attach the
two Cyclone Supports (F) underneath the two
Long Braces at the top of the Stand and align
its holes with the outside pair of bolt holes
[FIG. 7c] before securing in place with eight
Bolts (D2), eight Washers (D3), and eight
Whiz-Nuts (D4) for each Cyclone Support.
Note: For ease of installation, raise the top of
the stand assembly with blocks to install the
hardware.
FIG. 7c
FIG. 7b
Install Position
Install Position
