Oneida Air Systems Mini-Gorilla, Руководство пользователя

Страница: 11 / 24

9 oneida-air.com
Assembly Instructions (Continued)
Install Straight Fittings (C9D) into the recessed
holes under the fan housing and near the bottom
of the drum. [FIG. 3a] [FIG. 3b] Secure in place
using the fitting’s nut on the inside; using a
Rubber Washer (C9E) between the nut and the
inner wall. [FIG. 3c]
Note: For ease of assembly, when installing to the
bottom of the drum, we recommend to wedge
a flat screwdriver between the Straight Fitting
(C9D) and the inner wall to secure it in place
when securing the nut.
3
4
Install each of the three Drum Casters (C9M) to
the drum using two 1/4" Hex Head Bolts (C9N),
two Rubber Washers (C9O), two 1/4" Flat
Washers (C9P), and two 1/4" Whiz-Lock Nuts
(C9Q) as shown in [FIG. 4]. Use the bolt holes
on opposing sides of the caster plate as shown in
[FIG 4b]
Note: Be sure to use the rubber washer under the
steel washers to assure an airtight seal. It is very
important that there are no leaks.
FIG. 3a
FIG. 4a
FIG. 3c
SECTI
A
DETAIL A
SCALE 1 : 1
DETAIL
SCALE 1 : 1
SECTI
A
DETAIL A
SCALE 1 : 1
DETAIL
SCALE 1 : 1
INCORRECT
CORRECT
FIG. 4b
INCORRECT
C9M
C9N
C9O
C9Q
C9D
C9E
C9P
FIG. 3b