Oneida Air Systems Dust Gorilla Pro, Руководство пользователя

Страница: 13 / 26

11 oneida-air.com
Assembly Instructions (Continued)
Apply Gasket (K1) making sure that there is no
gap where the ends meet:
a. Apply to the top flange of the Cone (D)
inside the bolt holes [FIG. 2a].
b. Apply to the top rim of the Barrel (C)
outside of the bolt holes [FIG. 2b].
c. Apply to the Fan Housing (B) outlet inside
the bolt holes [FIG. 2c].
d. Apply to the top of the Fan Housing (B)
outside the bolt holes and not covering up
the U-Spring Clips (K2)[FIG. 2d].
e. Apply to the Filter Plate (J2); it may
partially cover the bolt holes. Make sure
that there is enough room for the bolts to
push through [FIG. 2e].
Note:
Dust collection systems cannot operate
effectively if there isn’t a complete seal. There must
be NO air leaks.
2
To assemble the supplied support system (e.g.
stand or wall-bracket) refer to the included
instruction sheets:
• Stand Instruction Sheet #ZBI000014
• Wall Bracket Instruction Sheet #ZBI010014
3
FIG. 2a
Top View
Top View
FIG. 2b
FIG. 2c FIG. 2d
FIG. 2e