Oneida Air Systems Dust Deputy AXD000004, Руководство пользователя

Страница: 6 / 12

5
Dust Deputy Owner’s Manual © 2009
V. Possible Ways to Attach Dust Deputy to Shop Vacuums
You may want to attach your Dust Deputy to
your shop vacuum for mobility, convenience
or stability. There is no defi nitive way to
attach the Dust Deputy to a shop vacuum. It
will vary with vacuum type and intended use
These are just a few examples of possible
ways it may be done.
Some vacuums may only require one foam
block to attach the bucket. This may be
determined by vacuum body shape.
Cut the provided foam block in half. Drill two
1/4” holes through bucket, blocks and vacuum
as shown, then using provided long bolts,
washers and nuts, attach bucket to vac.
Cut the provided foam block to size. Drill two
1/4” holes through bucket, blocks and vacuum
as shown, then using provided long bolts,
washers and nuts, attach bucket to vac.
The mounting is only limited by your
imagination.
Use the foam blocks as spacers be-
tween the vac and bucket then put the
assembled Dust Deputy into the
attached bucket to hold it securely to
the vacuum. Attach the appropriate
hoses and you’re ready to go.
Use the foam block as upper spacer
between the vac and bucket then put
the assembled Dust Deputy into the
attached bucket to hold it securely to
the vacuum. Attach the appropriate
hoses and you’re ready to go.
To prevent tipping problems,
please see pg. 9 in this manual.