17
oneida-air.com
Tips and Tricks (Cont.)
Mount flex hose to the bottom of the Cyclone instead of
mounting the Cyclone directly to the lid. The components
you would need to complete this as shown in [FIG. 9a] are:
a. (x2) 6" Collared Flange*
b. (x2) Quick-Release Hose Clamp*
c. 6" Flex Hose. 5' is the shortest length we offer. If
needed, you can purchase longer lengths for your
setup*
d. Lid
e. Drum
f. Gasket/silicone for an air tight seal*
g. A Wall Mount or stand to support the Cyclone and to
easily remove the lid when emptying your drum
[FIG. 9b].(SMS050600)
Note: All components are available on our website.
*6" Dust Bin Hose Connection Kit (KDZ000013)
2
a
f
b
c
d
e
FIG. 9a
FIG. 9b
g
