13
oneida-air.com
Assembly Instructions (Continued)
To wet/dry vacuum
To Tool
FIG. 10b
FIG. 10c
FIG. 10a
Attach one Elbow (J) to the top outlet of the Cyclone (A)
and affix Hose (I) to the tapered end of the Elbow. Attach
the other open end of Hose to the second Elbow and attach
to the inlet of your wet/dry vacuum.
Connect the Cyclone's inlet (sideways facing port) to your
dust producing tool with your vacuum's hose or ductwork
[FIG. 10a].
Note: If your vacuum hose is not tight on the inlet or it keeps
pulling off, use the Clamp Band (K) and/or the two O-Rings
(L) [FIG. 10b] [FIG. 10c].
9
K
L
